Rinnai Hot Water Heat Pump in Merrilands, TKI

Japan / New ZealandClimate Zone 5

Looking at a Rinnai hot water heat pump for your Merrilands home? Installed pricing for Rinnai in Taranaki ranges from $6,500 - $9,500 (indicative, June 2026). There are no rebates for hot water heat pumps in New Zealand, so that is the full price. Households wanting a well-supported mid-range option, especially larger families needing 275-340L capacity.

Rinnai's pricing of $6,500 - $9,500 aligns closely with the local typical installed range of $6,150 - $9,150, offering a solid balance of performance and value.

This climate zone offers good year-round hot water heat pump performance. Cool winters mean a modest seasonal efficiency drop, but well below the point where it changes the economics. Standard integrated models perform well.

$6,500 - $9,500
Installed (full price)
$0
Rebates in NZ
3.7
COP (efficiency)
7yr
Max warranty

Rinnai Models Available

Rinnai Enviroflo 265L

$6,500 - $8,000
installed, indicative
Capacity
265L
COP
3.7
Running cost (est.)
~$325/yr
Energy stars
5 stars
Suitable for
3-5 person household
Noise
46dB
Dimensions
1720x630x630mm
Weight
90kg

Rinnai HydraHeat 275L

$7,800 - $8,800
installed, indicative
Capacity
275L
COP
4
Running cost (est.)
~$300/yr
Energy stars
5.5 stars
Suitable for
3-5 person household
Noise
45dB
Dimensions
1750x640x640mm
Weight
98kg

Rinnai HydraHeat 340L

$8,500 - $9,500
installed, indicative
Capacity
340L
COP
3.9
Running cost (est.)
~$320/yr
Energy stars
5.5 stars
Suitable for
4-6 person household
Noise
45dB
Dimensions
1850x650x650mm
Weight
105kg

Specifications and pricing are indicative for the NZ market as at June 2026. Confirm current models and exact pricing with your installer.

How Rinnai Performs in Merrilands's Climate

Very GoodClimate Zone 5 | R134a refrigerant

Rinnai performs well in climate zone 5's temperate conditions. The R134a system delivers good efficiency through most of the year, with a modest reduction in COP over winter. Overall savings versus a standard electric hot water cylinder remain strong.

Noise Levels in a Built-Up Area

At 46dB, Rinnai produces moderate noise comparable to a quiet conversation. In built-up areas with close neighbours, consider placement on the side of the home furthest from neighbouring bedrooms.

Pros

  • Large NZ installer network and local support
  • HydraHeat 340L suits big households
  • Competitive installed bundles
  • 7-year cylinder warranty
  • Easy swap from an existing Rinnai system

Cons

  • Integrated units are audible (45-46dB)
  • Not as efficient as CO2 split systems
  • Premium models approach split-system pricing

Rebates and Financing for Rinnai in Merrilands

Government rebates

None exist in New Zealand

There is no STC-style scheme, no national rebate, and no Taranaki rebate for hot water heat pumps, whichever brand you choose. Warmer Kiwi Homes covers insulation and space-heating heat pumps only, not hot water.

$0
Financing that helps

Bank green home loan top-ups

ANZ, ASB and BNZ offer top-ups at about 1% p.a. fixed for 3 years (up to $80,000); Westpac offers 0% up to $50,000 over 5 years. You need an existing home loan and equity, and the balance reverts to standard rates after the promotional window. Check terms with your bank.

What actually exists in Taranaki

The energy picture in Taranaki

Taranaki is the home of NZ gas production and has the country's highest household gas connection rate. That cuts both ways: as the fields decline (reserves are at a 20-year low), local households face the same rising gas prices as everyone else. A hot water heat pump typically cuts water-heating energy use by 60-75% compared with a gas or electric cylinder.

New Zealand has no gas ban, but the supply picture is shifting: proven gas reserves fell 27% in a single year to a 20-year low, and production is falling faster than forecast. For Merrilands households with gas hot water, the practical takeaway is to plan ahead. Keep using and repairing your current system, but when it reaches end-of-life, replacing it with a hot water heat pump rather than another gas unit avoids locking in 10+ more years of exposure to rising gas prices.

Compare Other Brands in Merrilands

Rinnai in Merrilands - Frequently Asked Questions

How much does a hot water heat pump cost in Merrilands?
A hot water heat pump in Merrilands typically costs between $6,150 and $9,150 fully installed (indicative, June 2026). There are no government rebates for hot water heat pumps in New Zealand, so this is the full price. Entry supply-and-install bundles start from around $6,400 nationally, while complex installations or relocations can run $9,000 to $13,000. The final price depends on the brand, cylinder size, and how straightforward your installation is.
What rebates are available for a hot water heat pump in Merrilands?
None. New Zealand has no equivalent of Australia's STC scheme and no national or Taranaki rebate for hot water heat pumps. What can help with the upfront cost: bank green home loan top-ups (ANZ, ASB and BNZ offer around 1% p.a. fixed for 3 years up to $80,000; Westpac offers 0% up to $50,000 over 5 years; you need an existing home loan and equity, and rates revert after the promotional period). The Warmer Kiwi Homes programme covers insulation and space-heating heat pumps only; it does not cover hot water heat pumps.
Are hot water heat pumps efficient in Merrilands's climate?
Merrilands has a temperate climate with cool, sometimes blustery winters. This climate zone offers good year-round hot water heat pump performance. Cool winters mean a modest seasonal efficiency drop, but well below the point where it changes the economics. Standard integrated models perform well. At average NZ electricity prices, a typical household spends roughly $250 to $450 a year running a hot water heat pump, where a standard electric hot water cylinder doing the same job usually costs three to four times as much to run (estimates; actual costs depend on your tariff and usage).
What does the NZ gas supply crunch mean for Merrilands?
Taranaki is the home of NZ gas production and has the country's highest household gas connection rate. That cuts both ways: as the fields decline (reserves are at a 20-year low), local households face the same rising gas prices as everyone else. A hot water heat pump typically cuts water-heating energy use by 60-75% compared with a gas or electric cylinder. There is no ban and no deadline: you can keep repairing an existing gas system. The decision point comes at end-of-life, when replacing gas hot water with a hot water heat pump avoids signing up for another decade of rising gas costs.
How long does a hot water heat pump installation take in Merrilands?
A straightforward like-for-like swap from an electric hot water cylinder in Merrilands takes around 3-5 hours. Allow a full day if you are converting from gas (the gas supply needs to be safely capped) or relocating the cylinder. Installers servicing this area can usually attend within a week or two.
What size hot water heat pump do I need for my Merrilands home?
As a rule of thumb for Merrilands (climate zone 5): 1-2 people suit a 220-250L cylinder, 3-4 people a 250-300L cylinder, and 5+ people a 300-340L cylinder. In your milder climate the unit recovers quickly, so standard sizing works well.
Which hot water heat pump brand is best for Merrilands?
Merrilands sits in climate zone 5, where all the major NZ brands perform well. Rheem and Rinnai have the broadest installer and service networks; Econergy is the budget-friendly New Zealand brand; Stiebel Eltron offers German-engineered integrated units; and Reclaim Energy is the premium CO2 split system for maximum efficiency and the quietest operation.
Free Quote
Step 1 of 4

Where are you?

See indicative costs and local installers for your area

100% freeNo obligationTakes 30 sec